Ampire MBM110.4-2G amplifier

Class-D 4-channel amplifier.

• 4-channel digital amplifier
• Ultra-compact design
• Cinch and balanced speaker inputs
• 440 W RMS/880 W max.
• Illuminated AMPIRE logo
• Input for additional controller

SPECIFICATION

• Power supply:
• Supply voltage: 10 - 16 VDC
• Resting current: 1,04A
• Resting current when switched off: <0.4mA
• Output power (RMS) at 14.4 V / 4 Ohm: 75 W x 4
• Output power (RMS) at 14.4 V / 2 Ohm: 110 W x 4
• Output power (RMS) @ 14.4 V / 4 Ohms: 220 W x 2 (bridged)
• Output power (max.) @ 14.4 V / 4 Ohm: 150 W x 4
• Output power (max.) @ 14.4 V / 2 Ohm: 220 W x 4
• Output power (max.) @ 14.4 V / 4 Ohm: 440 W x 2 (bridged)
• Distortion (THD): <0.5%
• Signal-to-noise ratio: >90dB
• Channel separation: >68dB
• Input sensitivity: 500mV - 15.0V

FILTERS

• CH 1&2
• High-pass filter/slope: 15Hz - 500Hz / 12dB
• Bandpass filter/slope: HP 15Hz - 500HZ, TP 50Hz - 5000Hz / 12dB
• Bass Remote Controller (optional) in band-pass mode
• CH 3&4
• High-pass filter/slope: 50Hz - 5000Hz / 12dB

OTHER FUNCTIONS

• Fuse: 25A x 2 (internal)
• Maximum size (L x W x H): 251 x 141 x 50 mm
• Weight: 1.85kg

Inputs: RCA x4 for low level and high level (automatic high level switching for main units with BTL amplifier)

Important information regarding class D amplifiers: Class D power amplifiers can sometimes, due to their design, interfere with radio reception. To avoid this, please note the following points:

• Only connect speaker cables with a narrow twist.
• The ground cable from the amplifier to the body should be as short as possible.
• Do not lay power and speaker cables near radio reception elements.
• The amplifier should be mounted as far as possible from the radio reception elements.
• Use only pure copper wires.