Ampire Bluetooth adapter BTR300X

Bluetooth receiver with aptX® for wireless Bluetooth A2DP audio streaming.

The BTR300X Bluetooth receiver is designed for navigation and car radio with a 3.5 mm jack input and USB-A power supply.

What improves Bluetooth® aptX®? The aptX® codec uses a more efficient method of compressing audio data so that the available bandwidth is better utilised. A prerequisite for supporting aptX® streams is that both the player and the transmitter support Bluetooth aptX®. This can be recognised by the aptX® logo on the device. The codec supports popular audio formats such as MP3 and FLAC.

CONNECTIONS

• Audio output: 3.5 mm jack connector
• Power supply: USB input (5 VDC)

EQUIPMENT:

• Splash-proof, certified as marine equipment
• Automatic switch-on
• Licensed Bluetooth 4.0 (CSR8645)
• A2DP in the highest EDR specification
• Qualcomm® aptX audio codec
• Bluetooth audio streaming also for lossless files such as Wave, Flac, Lossless, etc.
• 3.5 mm (jack) connector with 1.0 V signal output
• SSID name: BTR300X
• Range 10 m

SMARTPHONE COMPATIBILITY

• Android (Bluetooth and Bluetooth aptX®)
• Apple iOS (Bluetooth)

TECHNICAL DATA:

• Voltage: 5 Volt DC
• Power consumption current: <45mA
• Bluetooth 4.0
• CSR8645 chip
• Qualcomm® aptX audio codec
• Frequency range: 20 Hz-20 kHz
• Coding: Low Compound Sub-Band (SBC) codec
• Bit rate: up to 384 kbps (48 kHz sampling)
• Audio output voltage: 1V RMS
• Bluetooth 4.0 / Transmission power <10mW EIRP and aptX
• Cable length: 300 mm
• Housing dimensions: Height: 20 mm, Width: 65 mm, Length: 50 mm

OBSERVER:

• Ensure that Bluetooth on your device is turned on
• Switch on the ignition
• LED (6) flashes blue (pairing mode)
• Select BTR300X in the Bluetooth menu of your device to connect
• After a successful connection, the LED lights up continuously and a single beep is played by the audio system.

NOTES:

• It is possible to connect up to nine devices to the BTR300X, but only one device can always stream music.
• The BTR300X always remembers the last paired device and automatically connects when switched on.
• The connection to another device must be made manually as described above.
• If the connected device is out of range for more than one minute, the connection is automatically interrupted and the BTR300X enters pairing mode [LED (6) flashes].
• It is only possible to use in vehicles and is not intended for continuous operation.
• All settings, such as volume, music selection and Play/Pause, can be made on your device.
• The BTR300X can be installed out of sight as it has no controls or buttons that require operation.