AMPIRE CPM102 multimedia monitor

Want to upgrade your factory car radio without a screen by adding Apple CarPlay or Android Auto? Then the CPM102 Smartphone Monitor is the perfect product for you. This high-resolution 10" touchscreen allows you to integrate your smartphone into almost any vehicle, as well as display the video from the optional reversing camera.

Our CPM102 Smartphone Monitor with integrated smartphone interface is compatible with wireless Apple CarPlay® and Android Auto (please note minimum requirements), providing a smart and safe way to use your smartphone in the car.

Everything is operated via Siri or OK Google's intelligent voice command, or on the 10" touchscreen, which can be securely mounted, for example, on the dashboard using the supplied bracket.

Anything you want to do with your smartphone while driving can be done directly on this monitor thanks to Apple CarPlay® or Android Auto. You can easily get directions, send and receive messages. If your car has a factory wireless hands-free system, you can operate it with our smartphone integration and make phone calls. While navigating, you can listen to your favourite music via Spotify, for example, or your favourite radio via the radio app - and concentrate on the road at the same time.

Simply connect your smartphone wirelessly to our monitor via Wi-Fi and you're ready to go. The audio is transmitted via the Audio AUX input (3.5mm jack) of your factory car radio. If your vehicle has A2DP factory audio streaming, you can stream audio from the CPM102 directly to your car radio without loss of quality. Alternatively, there is an integrated FM-Transmitter, which sends audio as an FM signal that can be received by your car radio. In addition, there is a small speaker in the housing which can play navigation announcements, for example.

Technical data:

Display:

• 10″ IPS LCD touchscreen monitor
• 9.2″ / 23.4 cm visible diagonal
• 24:9 aspect ratio
• Touch operation
• Adjustable LED backlighting
• Very high resolution 1600 x 600
• Brightness 750 cd/m²
• Contrast ratio 1000:1
• Refresh rate 60 Hz
• Vertical viewing angle 130°
• Horizontal viewing angle 150°
• Our monitors meet ISO 9241-307, defect pixel class II

Smartphone integration:

• Apple CarPlay wireless
• Minimum requirements: iPhone 5 and later. CPM102 can only be connected to Apple CarPlay wirelessly, not via USB cable.
• Wireless Android Auto
• Minimum requirements: Android 11, Android Auto 4.8 and 5 GHz Wi-Fi*.
• *The IEEE 802.11a, 802.11ac, 802.11ax, 802.11be and 802.11n standards
• ATTENTION: Devices that only support 2.4 GHz Wi-Fi are not supported and are not compatible!
• The CPM102 can only be connected to Android Auto wirelessly, not via a USB cable.

When you pair your smartphone with the CPM102 and connect your smartphone to your car radio's A2DP, audio from CarPlay or Android Auto will be directly transmitted from your smartphone via A2DP to your car radio*. (*Provided your car radio supports A2DP.)

AHD Dual Dashcam:

• Integrated front camera on the back of the monitor
• AHD (Analogue High Definition), incompatible with CVBS
• 1080p (resolution 1920 x 1080 pixels)
• Frame rate: 25 FPS
• Viewing angle: 120° horizontally, 145° diagonally

Systemic reversing camera:

• AHD (Analogue High Definition)
• 1080p (resolution 1920 x 1080 pixels)
• Frame rate: 25 FPS
• Viewing angle: 120° horizontally, 145° diagonally
• MINI-DIN 4P system connector
• Dimensions without Butterfly handle: 23 x 23 x 32 mm

Registrar:

• Recording resolution: 1080p+1080p or 720p+720p (adjustable)
• Segment length: 1 minute, 3 minutes, 5 minutes
• Audio recording enabled
• Park mode with motion detection and time-lapse recording. Adjustable for 12h or 24h, low voltage protection at 11.8V
• Memory card type: microSD (not included)
• MicroSD speed class: Class 10 or higher
• MicroSD capacity: min. 32 GB to max. 256 GB
• Recording capacities: 32 GB approx. 4.5 hours, 64 GB approx. 9.5 hours, 128 GB approx. 19 hours, 256 GB approx. 38 hours, then the oldest recordings are overwritten.
• Switch-on delay (ACC ON): 17 seconds
• Activation delay in park mode: 0 seconds
• Switch-off delay (ACC OFF): 15 seconds

Reversing camera:

• The system rear camera is used as the reversing camera. It is not necessary to install an additional reversing camera.
• 12 V control input for activation
• Immediate switchover to system rear camera in full screen with auxiliary lines when reverse gear is engaged
• Individually adjustable auxiliary lines
• Switch-off delay of 3 seconds after disengaging reverse gear
• Dashcam recording function is not interrupted in reverse camera mode
• Image playback normal/inverted adjustable

Audio output:

• Stereo audio output with 3.5 mm cable
• A2DP audio streaming of all CarPlay and Android Auto content directly from a smartphone. No additional app is required.
• FM-transmitter for alternative audio reproduction (87 - 108 MHz)
• Integrated 2W speaker with own enclosure

Other:

• LINUX 4.9 OS with 1 GB memory
• Apple CarPlay and Android Auto in full-screen or half-screen mode with simultaneous camera display (selectable)
• SD card reader (Micro SD)
• USB-C input for power supply
• USB-C power cable with ACC ignition logic
• Menu languages: DE, EN, FR, ESP, RU, JPN, CN, KOR
• Automatic switch-on when power is applied
• Operating voltage 9V - 36V DC
• ACC ON current consumption: 600mA@12VDC
• ACC OFF current consumption: 8.1mA@12VDC
• Current consumption in park mode: 290mA@12VDC
• Operating temperature: -20° to 70°C
• Storage temperature: -30° to 80°C
• Monitor dimensions
• System rear camera dimensions: 23 x 23 x 32 mm
• Weight of monitor with stand: 518 g

Kit contents:

• 10″ (25.4 cm) touchscreen monitor
• Basis
• USB-C power cable with connection to +12V, earth and ignition (ACC), 320 cm
• System rear camera AHD, 1080p, with Butterfly mount and 50 cm cable
• Connection cable for system rear camera, 700 cm
• Audio output cable (3.5 mm jack), 120 cm